SYNOLOGY NAS DS220+ (2 Hdds)

CPU ModelIntel Celeron J4025 CPU Quantity1 CPU Architecture64-bit CPU Frequency2-core 2.0 (base) / 2.9 (burst) GHz Hardware Encryption Engine (AES-NI)

System Memory2 GB DDR4 non-ECC Total Memory Slots1 Maximum Memory Capacity6 GB (2 GB + 4 GB) Notes

• Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
• Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.

Drive Bays2 Compatible Drive Type* (See all supported drives)

• 3.5″ SATA HDD
• 2.5″ SATA HDD
• 2.5″ SATA SSD

Hot Swappable Drive  Notes“Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.

RJ-45 1GbE LAN Port2 (with Link Aggregation / Failover support) USB 3.2 Gen 1 Port*2 USB / SD Copy  NotesThe USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.

Internal Drives

• Btrfs
• EXT4

External Drives

• Btrfs
• EXT4
• EXT3
• FAT
• NTFS
• HFS+
• exFAT

NotesexFAT Access can be installed for free from Package Center in DSM 7.0. In DSM 6.2 or earlier versions, exFAT Access needs to be purchased in Package Center.

Size (Height x Width x Depth)165 mm x 108 mm x 232.2 mm Weight1.30 kg

System Fan92 mm x 92 mm x 1 pcs Fan Speed Mode

• Full-Speed Mode
• Cool Mode
• Quiet Mode

Brightness Adjustable Front LED Indicators  Power Recovery  Noise Level*19.3 dB(A) Scheduled Power On / Off  Wake on LAN / WAN  Power Supply Unit / Adapter60 W AC Input Power Voltage100 V to 240 V AC Power Frequency50/60 Hz, Single Phase Power Consumption*14.69 W (Access)
4.41 W (HDD Hibernation) British Thermal Unit50.12 BTU/hr (Access)
15.05 BTU/hr (HDD Hibernation) Notes

• Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
• Noise Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%

Operating Temperature0°C to 40°C (32°F to 104°F) Storage Temperature-20°C to 60°C (-5°F to 140°F) Relative Humidity5% to 95% RH

• FCC
• CE
• BSMI
• EAC
• CCC
• KC
• VCCI
• RCM

2 Years NotesThe warranty period starts from the purchase date as stated on your purchase receipt. (Learn more)

RoHS Compliant

• Main Unit X 1
• Accessory Pack X 1
• AC Power Adapter X 1
• AC Power Cord X 1
• RJ-45 LAN Cable X 2
• Quick Installation Guide X 1